Hey guys, it’s me Ken, also known as “Too 0.16.” In today’s video, we are going to go through a very budget-friendly way to fix a crack on your Tesla windshield. Bear in mind that this method will work on any vehicle windshields, not just Teslas. It’s a very easy process that anyone can do, and I’d recommend trying it before spending the big bucks to replace the entire thing. Ain’t Nobody Got Time and the money for that, so let’s move on to the video.
Here’s the windshield repair kit I used from RainX. Do note that the instructions specifically say that it can repair up to 30 cm or 12 in, but as you’ll see in the results later, it definitely sold itself short. You can pick it up from any hardware store or online, and I’ll have everything linked in the description below if you guys are interested.
The first thing you need to do is look at the crack and, um, cry yourself to sleep. That’s highly recommended before starting, and then get it all over with. So, this crack is about 38 cm long, and the first thing I’m going to do is put some tape on it so I can see the line better before applying the resin.
Another thing to note is that my friend who worked in those little huts that repair windshields said it’s just to make sure to touch the inside of the glass. It’s not very common for the inside to crack too because it’s pretty thick with three layers of glass. Just touch the inside, and if you don’t feel anything, which is good, it hasn’t punctured all the way through.
After taping off the crack, I proceed to use the repair kit on the bullseye where the rock hit my windshield. The kit comes with three pieces that you align with the crack and then apply the resin. After several applications and waiting periods, I was able to see a significant improvement in the crack size.
After applying the curing strips and waiting in direct sunlight, it was time to scrape off the excess resin with a straight razor. This process was a bit nerve-wracking, but it didn’t damage the windshield, and the result was impressive. The crack was significantly reduced, and it was barely noticeable from the inside of the car.
Overall, this resin repair only cost $12 USD, compared to the $500 deductible I would have had to pay through insurance to replace the entire windshield. The time and money saved by using this budget-friendly method were well worth it.
Let me know what you guys think of this DIY windshield repair method. If you enjoyed this content, I’ll see you guys next time. Thanks for watching!
[Music]
Out.
